Wii Nunchuck Remote Controller with Motion Plus Compatible with Wii and Wii U Console Wii Remote Controller with Shock Function (Blue)

Wireless Controller for wii & wii U

Advanced Connecting instruction:

If the wii remote cannot be connected to the wii console according to the above method, please try the following method.

(1) Clean up the previous Bluetooth connection of your console.

(2) Press the power switch of the Wii Console for more than 4 seconds.

(3) After confirming that the power light turns red,unplug the AC adapter.

(4) Please unplug the battery of the Wii remote and wait for about 1 minute.

(5) Please plug in the AC adapter.

(6) Insert the battery into the Wii remote control and press the power switch of the Wii Console.

(7) Simultaneously press the red sync button on the Wii Console and Wii remote.

Q & A:

Tips:

Low-power instructions: The connection indicator flashes quickly.

Please replace the new batteries in time when the low voltage alarm occurs.

If the connection is lost, please check:

1.If the battery voltage is below 2.3V, the connection may be broken. Please change to new batteries;

2.The batteries could be loose;

3.Please do not place the controller too close or too far from the Wii host. Keep the distance within 196 inchs.

4.You can try holding down the red button on the back of the controller (SYNC button) and the SYNC button on the Wii console once again.