• icon
    Thanh toán đa dạng, linh hoạt
    Chuyển khoản ngân hàng, thanh toán tại nhà...
  • icon
    Miễn Phí vận chuyển 53 tỉnh thành
    Miễn phí vận chuyển đối với đơn hàng trên 1 triệu
  • icon
    Yên Tâm mua sắm
    Hoàn tiền trong vòng 7 ngày...

RENECTIV TPMS Sensor,315Mhz Tire Pressure Monitoring Sensor Fit for Toyota Lexus,Scion Replace#42607-33021 PMV-107J(4-Pack)

  • Mã sản phẩm: B08J9SHLSR
  • (48 nhận xét)
best choise
100% Hàng chính hãng
Chính sách Đổi trả trong vòng 14 ngày
Kiểm tra hàng trước khi thanh toán
Chưa có nhiều người mua - cẩn thận
  • Manufacturer:SSHENG
  • Brand:RENECTIV
  • Item Weight:5.6 ounces
  • Package Dimensions:4.2 x 3.6 x 2.5 inches
  • Batteries:4 CR2 batteries required. (included)
  • Manufacturer Part Number:42607-33021
  • OEM Part Number:42607-04010, 42607-AD010, 42607-AD020,, 42607-0C010, 42607-0C020, 42607-33011, 42607-34020, 42607-06011, 42607-33021, 42607-35040, 42607-75010, 42607-30030, 42607-35010
1,432,000 vnđ
- +
RENECTIV TPMS Sensor,315Mhz Tire Pressure Monitoring Sensor Fit for Toyota Lexus,Scion Replace#42607-33021 PMV-107J(4-Pack)
RENECTIV TPMS Sensor,315Mhz Tire Pressure Monitoring Sensor Fit for Toyota Lexus,Scion Replace#42607-33021 PMV-107J(4-Pack)
1,432,000 vnđ
Chi tiết sản phẩm

Tính năng sản phẩm

• 【Pre-programmed TPMS Sensor】The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make/model/year of vehicle,just activate them with TPMS scan tool. The specific operation is as follows Step 1: Select “Check Sensor” in TPMS scan tool. Step 2-4: Select vehicle brand,model and year. Step 5: Select tire location then push button to trigger . Step 6: Wake up sensor successfully and display sensor information on screen.
• 【High QUALITY】The battery can be used normally for more than 5 years, the pressure reading can reach 110 PSI or higher, and the temperature can reach -40~125℃,same as OE quality
• 【APPLICATION】Compatible for Lexus:CT,ES,GS,GX,HS,IS,LFA,LS,LX,RX,HS,IS LFA,LS,LX,RX,SC Series / Toyota: 4 Runner,Avalon,Camry,Corolla,Cruiser,Highlander,Land Cruiser,Martix,Prius,RAV4,Sequoia,Solara,Tacoma,Tundra,Venza,Yaris / Scion:2012-2015 iQ,2006-2016 tC,2008-2016 xB,2008-2016 xD
• 【REPLACE PART NUMBER】4260706011, 4260704010, 4260724010, 4260730030, 4260733011, 4260733021, 4260734020, 4260735010, 4260735040, 4260775010, 426070C010, 426070C020, 42607AD010, 42607AD020
• 【GOOD SERVICE】One year warranty.Our commitment to you is total and we want you to always be 100% satisfied by the quality and efficiency of our service.

Mô tả sản phẩm

Brief content visible, double tap to read full content.
Full content visible, double tap to read brief content.

Product description

RENECTIV TPMS SENSOR
6014

RENECTIV 4260733011 Toyota TPMS SENSOR

Please Double check the interchange number and compatibility for your replacing

  • Battery Life: ≥5 years
  • Operating Temperature: -40°C + 120°C
  • Pressure Monitoring Range: 100 – 900kPa
  • Frequency: 315MHz
  • Installation Type:Clamp In
Package Quantity

4PCS*Tire Pressure Monitoring System Sensor

Replace Part Number

  • 4260733011.4260733021
  • 4260704010.4260706011
  • 4260724010.4260730030
  • 4260734020.4260735010
  • 4260735040.4260775010
  • 426070C010.426070C020
  • 42607AD010.42607AD020
applicable models

HOW TO INSTALL THE TPMS SENSOR

step1

Loosening the tire:

Lift your car, remove tire and the valve stem core to allow all the air to escape, then strip away the tire.

step 2

Dismount the sensor

  • Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o’clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.
  • Dismount the sensor: With a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.
step 3

Mount sensor and valve

  • Mount sensor and valve: Slide the valve stem through the valve hole of the rim.
  • Tighten the screw-nut with 4.0 Nm with the help of the positioning pin.
  • Assemble the sensor body against the rim and tighten the screw.
step 4

Mount the tire

  • Mount the tire: Place the tire on the rim, making sure that the valve faces the separation head at an angle of 180 degrees. Mount the tire over the rim.
  • Inflate the tire, check the balance before installing the wheel.

REMOVAL OF THE TPMS SENSOR:

1. Remove the screw that attaches the sensor to the valve stem and remove the sensor.

2. Using a standard tire valve stem tool, pull the valve stem through the hole and discard it. Use a rubber mallet or a block of wood to avoid damage to the rim.

Installation of TPMS Sensor:

1. Insert the new sensor through the valve stem hole making sure the flat side of the sensor is toward the rim.

2. Using a standard valve stem tool pull the stem straight through the hole until the valve stem is fully seated. To avoid damage to the sensor and the rim, use a rubber mallet or block of wood placed between the rim and the tool to make sure the valve is pulled straight.

HOW TO RELEARN THE TPMS SENSOR:

Need a tire pressure activation TPMS tool [ATEQ(VT41.VT46.VT56),AUTEL(TS408.TS508) etc.]

OBDII RELEARN

OBDII connector is required

1.Confirm TPMS sensors are properly installed

2.Adjust tire pressures to placard value

3.Activate TPMS Tool on left front tire sidewall next to the valve stem

4.Repear for RF/RR/LR tires

5.Apply OBD connector to DLC

6.Turn ignition to ON

7.Press OK on TPMS Tool to transfer data to ECU

8.Disconnect OBD connector from DLC

9.Turn ignition to OFF then ON

10.Drive for up tp 20 minutes

ENVIRONMENT
qa

 

Hỏi đáp
Nhận xét của khách hàng