TEN-HIGH CO2 Engrave Machine 40W 300x400mm Laser Engraving Machine with Exhaust Fan USB Port

Specifications:

• Communication Interface: USB port; Laser Type: CO2 Gas;
• Engraving Area: 400x300mm; Laser Power: 40W;
• Automatic lifting height: 150mm; Cutting/Engraving accuracy: 0.15mm;
• Engraving Speed: 0-500mm/s; Cutting Speed: 0-30mm/s;
• Carving Depth: 0-2mm (Depend on the material); Resolution: Up to 1000 dpi;
• Cutting thickness: 0-4mm (Acrylic), 0-2mm (hardwood such as Oak, mahogany), 0-3mm (cork such as plywood, plywood, composite board) (Depend on the material);
• Software: Laser engraving Plug-in CorelLASER & Seal Design Software LaserDRW;
• Compatible operating systems: WIN7/WIN8/WIN10 32-bit system is the most stable, also suitable for 64-bit;
• Working temperature: 5 – 40℃, Working humidity: 5% – 95% without condensed steam;
• Machine size: 810 * 610 * 410mm; Net Weight: 50kg;

Note:

• Please note the voltage you request, if not specified, we will send the local voltage of your destination.
• If you are not sure if the machine meets your needs, please ask online service. And in order to make sure you have bought the right machine, please tell us the type of material you need to engraving or cutting as well as the patterns after you ordering. We will make samples using the machine that you ordered. and send you the pictures or video of the samples, then you can confirm if the machine meet your requierments. This is very important! We don‘t want our customers to lose money and time when they receive the machine.

Engraving and cutting samples

Typical Consumables replacement parameters:

• Laser Tube: 40W Length 700mm Diameter 50mm
• Focal Lens: Diameter 18mm / focal length 50.8mm
• Reflection Mirror: Molybdenum Mirror 20mm

Attention: This items can only engraving on plane surface. If you want to engrave on curved, rounded or spherical surfaces, you will need to add an extra rotary axis. We also provide separate rotary axis or machine that equipped with a rotary axis. You can contact online.

Application: seal engraving, advertisement, art gift, garment, leather, toy, building upholster, computerized embroidery, packing, printing, paper product, garments sampling, etc.

Engraving Materials:

---Matched: Acrylic, Plywood, Density board, Solid wood, PVC, Leather, Glass, Double color plate, Plastic, Silica gel, Ox horn, Felt, Resin, etc, All non-metal materials.

---Not apply to metal: Can't engraving metal, Only engrave the coat of paint on the metals.

Machine use questions welcome to ask the online service.

Packaging of the machine

Notice:

• We will provide a safe and reliable packaging, the damages in the transport link will be compensated and replaced by our part. Just contact online service in time.

Machine Maintenance:

1. Mechanical parts (rails, etc.): There is no specific time limit for the lubrication of the mechanical parts (reasonable maintenance according to the use of the machine). If engraving and cutting materials what are corrosive or easy to produce dust, it is recommended to lubricate the parts after each use of the machine. If engraving and cutting the wood materials, the parts can be lubricated every 2 weeks (apply lubricant with linen, avoid Direct contact by hands, normal car lubricants can be used).

2. Lens: If engraving and cutting materials what are corrosive or easy to produce dust, Clean the lens after each use of the machine. If engraving and cutting the wood materials, the lens can be clean every 2 weeks. Please clean it with cotton swab and stick alcohol. When wiping the lens, pay attention to check if there are any scratches on the lens or if the reflective film falls off. (Regularly Cleaning).

3. Laser tube: The laser tube cooling water should be enough, at least 15 liters of water, keep the water cold and cycle it often. Change water every 2 weeks in Summer (Water temperature should not exceed 30 degrees in summer, can put ice in the water to cool down); Change water every 1 month in Winter (be careful not to let the water freeze in winter); When the machine power is high, need to keep the water clean. Before the machine starts working, be sure to Check whether the laser tube through the water normally, otherwise the laser tube will be damaged.