Teexpert epoxy resin after curing will hard as rock ,which the hardness after curing is 90HV+.
Teexpert epoxy resin offers non-yellowing protection. Its advanced stabilization additives provide superior, long-term clarity.
Teexpert self leveling for epoxy resin is a great design,it can take less time for resin art.
Teexpert resin epoxy are also support self degassing.After stirring, wait a few minutes for the bubbles to disappear automatically
Measure 1:1 by volume.
Pour resin and pigment or mica powder together into a mix cup.
Mix slowly until absolutely no swirls are seen, scrape sides and bottom thoroughly.The more slowly stir, the less bubbles appear.(Time:3-4 minutes).
The thin the resin, the better self equal effect. Slowly pour mixed resin down the side of the resin mold silicone to avoid introducing additional bubbles.
Wait 1 hour to cure,then place in the flower (if you not place additional such as flower, please ignore this steps).
Wait 4-6 hours, the first layer rein has hard, to avoid the flowers float when the second layer poured(if you not place additional such as flower, please ignore this steps).
Repeat 1-3 steps,Pour the second layer to the mold slowly, the reason of this steps is avoid the additional float(if you not place additional such as flower, please ignore this steps).
Allow to cure for 24 hours(heat and mass will dictate the amount of cure time required - the bigger the mass the faster it will cure, as well as the warmer the air temperature the faster it will cure - Note: thin areas take longer to cure).
HOW TO AVOID STICKY OR SOFT RESIN
1.The biggest culprit is usually off-ratio measuring,It’s important to measure the resin and hardener 1:1 ratio.
2.Stirring around and around, purposefully, as well as from side to side. Scrape the walls and the bottom of the cup a couple of times during mixing to release unmixed resin too. Then stir that through as well!
3.Epoxy Resin hates moisture, so working in very humid conditions or adding things to the epoxy resin that contain moisture will stop the resin from curing properly.
4.When you’re colouring epoxy resin with dyes and pigments, add no more than 10% of the total resin volume. The less you add, the better.
5.It’s best to stick with dyes and pigments that are designed specifically for resin,But some of pigment or dye that aren’t designed for resin will prevent the resin from curing properly.
5 SIMPLE WAYS TO ACHIEVE BUBBLE FREE
1.Stir slowly in one direction to avoid bubbles, which are very easy to produce if you stir too fast.
2.Put the mixed resin and hardener into hot water at about 60 degrees to accelerate the bubbles coming out.
3.Use the heating coaster (around 60 degrees) to accelerate the bubbles out, which is very convenient to operate.
4.Use lighter or heat gun to heat the resin surface to eliminate air bubbles.
5.If you're using silicone molds you can warm the mold in the oven before pouring the resin in it. Take the mold out of the oven, let it air for a few seconds and then pour the resin in. The warmth of the mold will get rid of the bubbles in the resin.
Đăng ký nhận thông tin qua email để nhận được hàng triệu ưu đãi từ Muathuoctot.com
Tạp chí sức khỏe làm đẹp, Kem chống nắng nào tốt nhất hiện nay Thuoc giam can an toan hiện nay, thuoc collagen, thuoc Dong trung ha thao , thuoc giam can LIC, thuoc shark cartilage thuoc collagen youtheory dau ca omega 3 tot nhat, dong trung ha thao aloha cua my, kem tri seo hieu qua, C ollagen shiseido enriched, và collagen shiseido dạng viên , Collagen de happy ngăn chặn quá trình lão hóa, mua hang tren thuoc virility pills vp-rx tri roi loan cuong duong, vitamin e 400, dieu tri bang thuoc fucoidan, kem chống nhăn vùng mắt, dịch vụ giao hang nhanh nội thành, crest 3d white, fine pure collagen, nên mua collagen shiseido ở đâu, làm sáng mắt, dịch vụ cho thue kho lẻ tại tphcm, thực phẩm tăng cường sinh lý nam, thuoc prenatal bổ sung dinh dưỡng, kem đánh răng crest 3d white, hỗ trợ điều trị tim mạch, thuốc trắng da hiệu quả giúp phục hồi da. thuốc mọc tóc biotin
Mua hàng cực dễ dàng và nhanh chóng
Nhận hàng triệu khuyến mãi
Đăng kí tích điểm hoàn tiền lên đến 10%
Chính sách vận chuyển , giao hàng nhanh chóng
Mua hàng cực dễ dàng và nhanh chóng
Nhận hàng triệu khuyến mãi
Đăng kí tích điểm hoàn tiền lên đến 10%
Chính sách vận chuyển , giao hàng nhanh chóng
Mua hàng cực dễ dàng và nhanh chóng
Nhận hàng triệu khuyến mãi
Đăng kí tích điểm hoàn tiền lên đến 10%
Chính sách vận chuyển , giao hàng nhanh chóng