Portable Pneumatic Chamfering Tool Deburring-Trimming - 45 Degree Ultra Light Handheld Linear Air Beveling Tool for Metal, Mini Chamfering Machine Arc Edge Beveler Kit with Precision Blade Inserts

It can be chamfered in the narrowest and shallowest space, suitable for various angles, such as straight edge straight chamfering, inner and outer round hole chamfering, Irregular chamfering, multilateral chamfering of the keyway. Used for deburring and chamfering the R side of metal trimming arc corners.

Chamfering Machine can Pour Shapes

1. The maximum processing C Angle of this chamfering machine is C0.1-2 (The best effect is C1, C1 to C2 is best to be chamfered in two times, so the effect is better.)
2. Angle R is the arc Angle of R1.5
3. Adjusting the scale wheel can adjust the size of the bevel of the cut, but not the angle.

• The chamfer size can be adjusted at will: Loosen the 2 screws of the black gear plate with a thinner Allen key, twist the black gear plate left and right, adjust the chamfer size, and fix the 2 screws back to the original position

Change blade operation: Loosen the triangle blade screw with a thicker Torx wrench, replace the blade with a new one, and fix the screw again.

Usage and maintenance tips

1. Before using the new machine, please inject pneumatic tool oil and inject about 4C.C into the air inlet. After continuous use for about 3 hours, about 4C.C is also injected into the air inlet.

2. After injecting pneumatic tool oil, let the machine idling for about ten seconds (do not operate), and let the internal parts of the grinder be lubricated as a whole before proceeding.

3. It is an air compressor (air pump) for mechanical use. The output of the air compressor is about 6~8kg. Generally, most of the compressed gas of a traditional air compressor contains water, and the piston of the air compressor brings out a small part of the lubricating oil. If the oil-water separator is not used, water and oil and gas will enter the inside of the machine for a long time. The occurrence of adhesion slows down the rotation of the machine, resulting in insufficient speed and torque. In this way, the pneumatic tool oil needs to be input into the air inlet, and the machine can be used normally after idling for about ten seconds.

• How to Replace blade? Use a hexagon wrench to loosen the plum screw,remove the baffle plate, remove the blade screw with a ring wrench,remove the old blade,and replace it with a new one.
• The chamfer size can be adjusted at will: Loosen the 2 screws of the black gear plate with a thinner Allen key, twist the black gear plate left and right, adjust the chamfer size, and fix the 2 screws back to the original position.