• icon
    Thanh toán đa dạng, linh hoạt
    Chuyển khoản ngân hàng, thanh toán tại nhà...
  • icon
    Miễn Phí vận chuyển 53 tỉnh thành
    Miễn phí vận chuyển đối với đơn hàng trên 1 triệu
  • icon
    Yên Tâm mua sắm
    Hoàn tiền trong vòng 7 ngày...

Fast Chip Kit for Quik SMD Removal with a Low Temperature Alloy

  • Mã sản phẩm: B015RV4NBS
  • (183 nhận xét)
best choise
100% Hàng chính hãng
Chính sách Đổi trả trong vòng 14 ngày
Kiểm tra hàng trước khi thanh toán
Chưa có nhiều người mua - cẩn thận
  • Manufacturer:SRA SOLDERING PRODUCTS
  • Part Number:SMDKIT
  • Item Weight:0.634 ounces
  • Product Dimensions:4 x 6 x 0.75 inches
  • Item model number:SMDKIT
  • Is Discontinued By Manufacturer:No
  • Material:Metal
  • Power Source:Battery-powered
  • Item Package Quantity:1
  • Included Components:TF5000 Flux, Low Melt Solder, Instructions
  • Batteries Included?:No
  • Batteries Required?:No
493,000 vnđ
- +
Fast Chip Kit for Quik SMD Removal with a Low Temperature Alloy
Fast Chip Kit for Quik SMD Removal with a Low Temperature Alloy
493,000 vnđ
Chi tiết sản phẩm

Tính năng sản phẩm

• The Fast Chip SMD Removal Kit is a quick and inexpensive way to remove SMD components from a PCB without a hot air station using only your soldering iron.
• Removes QFP's, PLCC's, SOIC's, and chip components under 300 degrees Fahrenheit
• Enough material to remove 8-10 SMD'S
• The Kit Contains: 2.7 ft. Fast Chip Removal Alloy - 1 2cc tube of SRA TF5000 No Clean Rework Paste Flux and complete Instructions for SMD Removal and Cleanup

Mô tả sản phẩm


The heart of the kit is a length of Fast Chip low temperature Removal alloy. This alloy is like a solder that melts at temperatures well below that of normal solder (136°F) and stays liquid long enough to melt the existing solder, allowing you time to carefully remove the component. Simply apply a liberal amount of the included flux to the pins of the chip that you want to remove, then use a soldering iron with a flat-edge tip to heat the pins while applying the low temperature alloy. The alloy will remain liquid for a few seconds while you coat all of the connections, once you've coated the pins you should be able to lift the chip free using tweezers or a hemostat. Clean the pads thoroughly and apply fresh solder and you're ready to solder a new part in place.

 

Hỏi đáp
Nhận xét của khách hàng