PARAMED Aneroid Sphygmomanometer with Stethoscope – Manual Blood Pressure Cuff with Universal Cuff 8.7-16.5" and D-Ring – Carrying Case in The kit – Black

Stethoscope included

Manual Blood Pressure Cuff comes complete with a stethoscope. This makes the device fully-fledged and ready to measure pressure. You will not need to acquire an additional stethoscope.

Comfortable cuff

Manual Blood Pressure Cuff by Paramed has a comfortable cuff 42 cm long. This means that people of any stature can measure pressure without problems. The cuff is designed for daily use and multiple measurements.

Standard D-Ring Cuff

A D-ring cuff is a cuff in which the user passes through one end of the cuff through a metal ring and then attaches it to the arm. Cuff adjustment is easily done using this stainless steel ring.

Clip for a cuff

The manometer has a special fastening tool so that you can attach it in a place that's comfortable for you. It's convenient for the readout to be at eye level so that you can carefully monitor the pressure gauge.

Put the cuff on your left arm 2-3 cm (~1 inch) above your elbow. Cuff's tubes should run along the center of your arm. Wrap the cuff around your arm so that you can fit one finger between the cuff and your arm, and attach it with Velcro.

Put the stethoscope on and place the head on your humeral artery a bit above the elbow joint facing the body where the artery usually runs. You can secure the stethoscope using the cuff.

Quickly fill the cuff with air until it reaches your typical upper pressure reading with an additional 30 mmHg. Then, stop pumping in air. Start letting air out of the cuff so that the manometer's arrow descends 2-3 marks per second.

Note the pressure when you first hear your heartbeat. This is the upper, or systolic, pressure number. Note the pressure when the sound stops. This is the lower, or diastolic, pressure number.