• icon
    Thanh toán đa dạng, linh hoạt
    Chuyển khoản ngân hàng, thanh toán tại nhà...
  • icon
    Miễn Phí vận chuyển 53 tỉnh thành
    Miễn phí vận chuyển đối với đơn hàng trên 1 triệu
  • icon
    Yên Tâm mua sắm
    Hoàn tiền trong vòng 7 ngày...

DIY Concrete Foundation Crack Repair Kit - Polyurethane Foam - 1/16" to 1/2" Wide Cracks - Low-Pressure Injection Method (FLEXKIT-100)

  • Mã sản phẩm: B00V3Q4TL6
  • (95 nhận xét)
best choise
100% Hàng chính hãng
Chính sách Đổi trả trong vòng 14 ngày
Kiểm tra hàng trước khi thanh toán
Chưa có nhiều người mua - cẩn thận
  • Manufacturer:Flexomeric Crack Repair Products Ltd.
  • Part Number:FLEXKIT-100
  • Item Weight:3.74 pounds
  • Package Dimensions:9.45 x 5.31 x 4.53 inches
  • Is Discontinued By Manufacturer:No
  • Material:Polyurethane
  • Item Package Quantity:1
  • Batteries Included?:No
  • Batteries Required?:No
4,353,000 vnđ
- +
DIY Concrete Foundation Crack Repair Kit - Polyurethane Foam - 1/16
DIY Concrete Foundation Crack Repair Kit - Polyurethane Foam - 1/16" to 1/2" Wide Cracks - Low-Pressure Injection Method (FLEXKIT-100)
4,353,000 vnđ
Chi tiết sản phẩm

Tính năng sản phẩm

• Permanently Stops and Prevents Water Leaks in Concrete Cracks. Used for Wet or Dry Cracks.
• Low-Pressure Injection Method. Quickly Expands and Cures To Form a Flexible Gasket.
• Completely Filling the Main Crack and Any Capillary Cracks or Cavities.
• No Drilling Or Special Tools Required. Used With a Standard Injection Gun.

Mô tả sản phẩm

Brief content visible, double tap to read full content.
Full content visible, double tap to read brief content.

Product description

Contractor-Grade Kit

Flexomeric includes only the highest-quality concrete crack repair materials in its repair kits. This insures that you successfully fill in cracks completely from the inside of the foundation wall through to the outside. This kit can be used to inject into a dry or an actively leaking concrete crack. The injection resin chemically reacts with water and bonds to concrete to form a water-tight, flexible gasket through the entire wall thickness, eliminating any future leaks.

The Flexomeric FLEXKIT-100 contains 2 single component, mid-range viscosity, high quality crack repair resin, a set of the crack surface paste and port adhesive, and the neccessary accesories needed to repair up to 8' long, 1/16" thick concrete foundation crack in an 8" thick wall.

PROFESSIONAL GRADE KIT

Ready for any job, our kits include the same materials and method that professional contractors use. We don't compromise on quality, so your repair gets done right the first time. 

What's in the box:

  • 2 Flexomeric FLEXTUBE-110 Crack Injection Resin Cartridges (300ml)
  • 1 Flexomeric Crack Adhesive (Part A)
  • 1 Flexomeric Crack Adhesive (Part B)
  • 2 Injection Nozzles for Crack Injection Resin Cartridges
  • 2 Pieces of Rubber Tubing
  • 12 Flat Injection Ports and Caps
  • 2 Mixing Sticks
  • 2 Pair of Gloves
  • 1 Plastic Trowel for Adhesive
  • 1 Instruction Booklet

REQUIRED TOOLS

Standard Caulking Gun

The 300ml, single-component FLEXTUBE-110 Flexible Resin is injected into the concrete crack using a good quality, single-component injection gun.

(Not included in this kit)

Wire Brush

A wire brush is required for Step 2 of the instructions.  It is used to clean away any loose concrete, paint, oil, dirt and other debri on the surface of the crack.

(Not included in this kit)

Spray or Squirt Bottle

Flushing the crack with water is Step 5 of the instructions. This is a must since the injection resin requires water to chemically react.

(Not included in this kit)

Safety Goggles

Safety goggles are required to ensure eye protection during the injection process. Materials may be harmful when in direct contact with eyes.

(Not included in this kit)
 

Which Flexomeric kit do I need?

Choosing the correct Flexomeric DIY Foundation Crack Repair kit is easy.

Measure the smallest width of the crack. Often, this is at the bottom of the crack. The injection material needs to be able to penetrate this portion of the crack to ensure that entire crack is sealed.

Take a quarter coin. The quarter coin is approximately 1/16" thick. If it can fit inside of the thinnest part of the crack, use the FLEXKIT-100 (or FLEXKIT-101 for a corner crack).

Otherwise, use one the FLEXKIT-200 (or FLEXKIT-201 for a corner crack).
 

 

Hỏi đáp
Nhận xét của khách hàng